Transmission Fluid Level Check 2010 Subaru Legacy 3.6R Limited 3.6L 6 Cyl.

The engine in your 2010 Subaru Legacy should be running when you perform a transmission fluid level check, otherwise it will be inaccurate. The video above shows where the transmission fluid dipstick or the transmission fluid check plug is located in your Legacy and how to check the transmission fluid level. Your Legacy will have either a transmission dipstick or a check or fill plug to perform a transmission fluid check. The transmission dipstick will typically be in the engine bay or on top or even the side of your Legacy transmission. The transmission check plug will typically be on the bottom or the side of the transmission and may also be next to the axle. If the transmission fluid level in your Legacy is low, you need to add transmission fluid through the dipstick tube or the check plug hole. When adding transmission fluid to your Legacy, be sure to add it slowly as it will fill up quickly and is difficult to remove excess fluid if you overfill.

If you are having problems with the transmission in your Legacy, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.