Oil & Filter Change 1990 Ford E-250 Econoline Club Wagon XLT 4.9L 6 Cyl.

Learn how to change the oil and oil filter in your 1990 Ford E-250 Econoline Club Wagon with this free video. What type of oil is required in a E-250 Econoline Club Wagon? You can use synthetic oil in any modern vehicle. Many vehicles will require the use of 100% synthetic oil, others allow synthetic blend, which is a mix of synthetic and conventional oil, and conventional oil too. The synthetic oil vs conventional oil debate has many proponents on both sides. Synthetic oil will not break down over time and tends to have longer change intervals, so if you want to have more time between oil changes, then synthetic oil is a good choice. Conventional oil works well for drivers who change their oil regularly and if it is approved for your E-250 Econoline Club Wagon. The owners manual will indicate if your 1990 E-250 Econoline Club Wagon takes 0W-20, 0W-30, 5W-20, 5W-30 or 10W-30. This video shows the location of the oil drain plug, oil filter, oil fill cap and dipstick in addition to the steps needed to change the oil and filter in your E-250 Econoline Club Wagon. For most Fords, you can wrap an old belt around the oil filter and unscrew it by hand. If you can't do this, see our parts page to find a Ford E-250 Econoline Club Wagon oil filter wrench. If your E-250 Econoline Club Wagon is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your E-250 Econoline Club Wagon.

We recommend wearing safety glasses whenever you are working under your E-250 Econoline Club Wagon. You never know what could be dripping down from the engine, battery acid, engine coolant, brake fluid, etc. All of these fluids are harmful to your eyes and skin so it is important to protect yourself.