Vehicle shown in this step: 2011 Mazda MX-5 Miata Grand Touring 2.0L 4 Cyl.
Procedure notes
This video shows you how to replace a burnt out rear turn signal on your 2012 Mazda MX-5 Miata. We recommend that you change both the driver and passenger side bulbs at the same time on your MX-5 Miata as they get dimmer over time and if one is out, then the other one is likely to burn out soon. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all or lights up without blinking when it is turned on, this is your MX-5 Miata's way of telling you that the bulb is burnt out. Turn your hazard lights on and check the front of your MX-5 Miata and then the back, whichever side is not lighting up is the side with the burnt out bulb.When changing the turn signal bulb in your MX-5 Miata, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
查看中文对照 · Chinese translation
本视频演示如何更换您 2012 马自达 MX-5 Miata 车辆的烧坏的后转向灯。 我们建议您在维修您的 MX-5 Miata 时，同时更换驾驶员侧和乘客侧的灯泡，因为灯泡随时间会变暗，如果其中一个损坏，另一个也可能会很快烧坏。 如果转向灯（也称为闪烁灯或闪光灯）快速闪烁、完全不闪烁，或者在打开时灯亮但不闪烁，这是MX-5 Miata在告诉你灯泡已烧坏。 打开危险警示灯，先检查 MX-5 Miata 的前部，再检查后部；没有亮起的一侧就是灯泡烧坏的一侧。更换 MX-5 Miata 的转向灯灯泡时，注意不要用手指触碰灯泡的玻璃部分，否则会导致灯泡过早损坏。