Add Transmission Fluid: 2010 Subaru Outback 3.6R 3.6L 6 Cyl.

This video shows you how to add transmission fluid to your 2010 Subaru Outback. Before contemplating a transmission fluid change and searching for the transmission fluid change cost on a Outback, see if you need to add transmission fluid. How to add transmission fluid? First, make sure that your engine was running when you checked the fluid level. If the transmission fluid level on your Outback is low, you need to add fluid through the dipstick tube or the check plug. Subaru has developed sophisticated transmissions through the years and it is critical that you add the exact type of transmission fluid stipulated by your owner's manual (typically in the back of the manual in a section titled Fluid Capacities.) The manual will likely call for a specific type of Subaru transmission fluid. It may state a type such as Dexron, Mercon, Allison, Type-F or CVT transmission fluid. If you are going to use a different brand of fluid such as Valvoline transmission fluid, be sure it matches the type specified in the owners manual. When adding transmission fluid to your Outback, be sure to add it slowly as the transmission fluid capacity is reached quickly and it can be difficult to remove excess fluid if you overfill.

When to add transmission fluid to a Outback? If you are having problems with the transmission in your Outback, such as clunky shifting or hesitation, check the transmission fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.