Vehicle shown in this step: 2005 Mitsubishi Lancer ES 2.0L 4 Cyl.
Source note on shared footage
We have a massive and growing video library, but we don't have everything...yet.
Car companies often use the same engines in different cars. They also slightly alter the styling and sell the same car by two different names (amongst other tricks to help offset development costs).
Our system selects the most applicable video for your car based, in part, on these characteristics. The video displayed may not look exactly like your car, but may be relevant enough for you to get a good idea how to do it.
查看中文对照 · Chinese translation
我们有一个庞大且不断增长的视频资料库，但还没有全部内容……
汽车制造商经常在不同车型中使用相同的发动机。 它们还略微调整了外观设计，并以两个不同的名称销售同一款车（以及其他一些技巧，以帮助抵消开发成本）。
我们的系统会根据这些特性，部分地选择最适合您车辆的视频。 视频中显示的内容可能与您的车辆外观不完全相同，但可能足够相关，让您了解如何操作。
Procedure notes
The video above shows you how to change a burnt out front turn signal bulb on your 1987 Mitsubishi Lancer. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Lancer's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Lancer is relatively easy - turn your hazard lights on and check the front of your Lancer and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.When changing the turn signal bulb in your Lancer, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
查看中文对照 · Chinese translation
上述视频展示了如何更换您 1987 三菱 Lancer 车辆前转向灯烧坏的灯泡。 如果转向灯（也称为闪烁灯或闪光灯）快速闪烁或完全不闪烁、在开启时一直保持亮着，这是Lancer在告诉你转向灯灯泡已烧坏。 排查 Lancer 上烧坏的转向灯灯泡较为简单：打开危险报警闪光灯，先检查 Lancer 车头，再检查车尾；哪一侧不亮，哪一侧的灯泡就可能已烧坏。 我们建议您同时更换驾驶员侧和乘客侧的灯泡，因为随着时间推移，灯泡会变暗，如果其中一个损坏，另一个也可能会很快烧坏。在更换Lancer车辆的转向灯灯泡时，请小心不要用手指触摸灯泡的玻璃部分，否则会导致灯泡提前烧坏。