Oil & Filter Change 2003 Mercedes-Benz A160 Classic 1.6L 4 Cyl.

Learn how to change the oil and oil filter in your 2003 Mercedes-Benz A160 with this free video. What type of oil is required in a A160? You can use synthetic oil in any modern vehicle. Many vehicles will require the use of 100% synthetic oil, others allow synthetic blend, which is a mix of synthetic and conventional oil, and conventional oil too. The synthetic oil vs conventional oil debate has many proponents on both sides. Synthetic oil will not break down over time and tends to have longer change intervals, so if you want to have more time between oil changes, then synthetic oil is a good choice. Conventional oil works well for drivers who change their oil regularly and if it is approved for your A160. The owners manual will indicate if your 2003 A160 takes 0W-20, 0W-30, 5W-20, 5W-30 or 10W-30. This video shows the location of the oil drain plug, oil filter, oil fill cap and dipstick in addition to the steps needed to change the oil and filter in your A160. For most Mercedes-Benzs, you can wrap an old belt around the oil filter and unscrew it by hand. If you can't do this, see our parts page to find a Mercedes-Benz A160 oil filter wrench. If your A160 is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your A160.

We recommend wearing safety glasses whenever you are working under your A160. You never know what could be dripping down from the engine, battery acid, engine coolant, brake fluid, etc. All of these fluids are harmful to your eyes and skin so it is important to protect yourself.