Procedure notes
The engine in your 2010 Ford Fusion should be running when you perform a transmission fluid level check, otherwise it will be inaccurate. The video above shows where the transmission fluid dipstick or the transmission fluid check plug is located in your Fusion and how to check the transmission fluid level. Your Fusion will have either a transmission dipstick or a check or fill plug to perform a transmission fluid check. The transmission dipstick will typically be in the engine bay or on top or even the side of your Fusion transmission. The transmission check plug will typically be on the bottom or the side of the transmission and may also be next to the axle. If the transmission fluid level in your Fusion is low, you need to add transmission fluid through the dipstick tube or the check plug hole. When adding transmission fluid to your Fusion, be sure to add it slowly as it will fill up quickly and is difficult to remove excess fluid if you overfill.
If you are having problems with the transmission in your Fusion, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.
查看中文对照 · Chinese translation
在进行变速箱油液位检查时，您的 2010 福特 Fusion 发动机应处于运行状态，否则检测结果将不准确。 上述视频展示了您的 Fusion 车型中变速箱油尺或变速箱油检查孔的位置，以及如何检查变速箱油液位。 您的 Fusion 车型将配备一个变速箱油尺或一个检查/加注螺塞，用于检查变速箱油。 传动轴油尺通常位于发动机舱内，或位于您的 Fusion 传动系统顶部或侧面。 变速箱检查孔通常位于变速箱的底部或侧面，也可能位于传动轴附近。 如果您的 Fusion 变速箱油液位偏低，需要通过油尺孔或检查孔加注变速箱油。 在为您的 Fusion 添加变速箱油时，请务必缓慢添加，因为油会很快充满，且如果加得过多，很难清除多余的油。
如果你在你的 Fusion 变速箱上遇到换挡不顺畅或迟滞等问题，请先检查变速箱油位——事实上，很多车主花费数千美元进行变速箱维修，其实只需加注半夸脱变速箱油就能解决。