本段视频演示车型：1991 马自达 323 BG-series 1.3 升 4 缸
操作说明
本视频演示如何更换您 1990 马自达 RX-7 车辆的烧坏的后转向灯。 我们建议您在维修您的 RX-7 时，同时更换驾驶员侧和乘客侧的灯泡，因为灯泡随时间会变暗，如果其中一个损坏，另一个也可能会很快烧坏。 如果转向灯（也称为闪烁灯或闪光灯）快速闪烁、完全不闪烁，或者在打开时灯亮但不闪烁，这是RX-7在告诉你灯泡已烧坏。 打开危险警示灯，先检查 RX-7 的前部，再检查后部；没有亮起的一侧就是灯泡烧坏的一侧。更换 RX-7 的转向灯灯泡时，注意不要用手指触碰灯泡的玻璃部分，否则会导致灯泡过早损坏。
查看英文原文 · English original
This video shows you how to replace a burnt out rear turn signal on your 1990 Mazda RX-7. We recommend that you change both the driver and passenger side bulbs at the same time on your RX-7 as they get dimmer over time and if one is out, then the other one is likely to burn out soon. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all or lights up without blinking when it is turned on, this is your RX-7's way of telling you that the bulb is burnt out. Turn your hazard lights on and check the front of your RX-7 and then the back, whichever side is not lighting up is the side with the burnt out bulb.When changing the turn signal bulb in your RX-7, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.