操作说明
你的 2008 Jeep Commander 的刹车灯在踩下刹车踏板时点亮，有助于防止后方车辆追尾。 刹车灯泡随着时间推移会逐渐变暗，最终烧坏。 查看如何更换您的 2008 Jeep Commander 的刹车灯。 第一步是找到你Commander车辆的刹车灯插座。 拆下制动灯插座，然后更换烧坏的制动灯泡。 在更换 Commander 的刹车灯泡时，请小心不要用手指直接触碰灯泡——手指上的油会使得你触摸到的灯泡部分温度高于其他部分，从而导致灯泡烧坏速度加快。
如果你要更换车灯中的灯泡，建议一并更换所有灯泡。 不仅您的Commander的灯光会更明亮，还能降低您在未来需要更换灯泡的可能性。 你的Commander尾灯组中一个烧坏的灯泡，足以成为交警拦截你的理由。 经常检查灯泡，一旦发现烧坏立即更换。
查看英文原文 · English original
The brake lights on your 2008 Jeep Commander illuminate when you hit the brake pedal and help prevent you from being rear ended by the cars behind you. Brake light bulbs grow dimmer over time and eventually burn out. See how to change the brake lights on your 2008 Jeep Commander. The first step is to locate the brake light socket in your Commander. Remove the brake light socket and then replace the burnt out brake light bulb. When you replace the brake light bulb on your Commander, be careful not to touch the bulb directly with your fingers - the oil from your skin will cause the area that you touched to burn hotter than the rest of the bulb, which causes the bulb to burn out quicker.
If you are going to replace a bulb in your housing, it is a good idea to replace all of them. Not only will the lights on your Commander be brighter, you decrease the likelihood you will need to change any of the bulbs again in the near future. A burnt out bulb in the taillight cluster of your Commander is an excuse for a police officer to pull you over. Check your bulbs frequently and change burnt bulbs promptly.